Macro Auto Persistent - Cisco 300 Series Cli Manual

44
Smartport Commands
Parameters
This command has no arguments or keywords.
Default Configuration
None
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
When a Smartport macro fails at an interface, the Smartport type of the interface
becomes Unknown. You must diagnose the reason for the failure on the interface
and/or Smartport macro, and correct the error. Before you or Auto Smartport are
allowed to reapply the desired Smartport macro, you must reset the interface
using the macro auto resume command, which changes the Smartport type of the
interface to default.Then you can run the macro auto trunk refresh command.
Example
Changes the Smartport type from unknown to default and resumes the Smartport
feature on port 1.
switchxxxxxx(config)#
interface gi11
switchxxxxxx(config-if)# macro auto resume

44.5 macro auto persistent

The macro auto persistent Interface Configuration mode command sets the
interface as a Smartport persistent interface. The no format of the command
returns it to default.
Syntax
macro auto persistent
no macro auto persistent
Parameters
This command has no arguments or keywords.
839 OL-32830-01 Command Line Interface Reference Guide