Show Interfaces Port-Channel - Cisco 300 Series Cli Manual

Port Channel Commands
OL-32830-01 Command Line Interface Reference Guide
37.3

show interfaces port-channel

To display port-channel information for all port channels or for a specific port
channel, use the show interfaces port-channel Privileged EXEC mode command.
Syntax
show interfaces port-channel
Parameters
interface-id—(Optional) Specify an interface ID. The interface ID must be a port
channel.
Command Mode
Privileged EXEC mode
Examples
The following example displays information on all port-channels.
switchxxxxxx# show interfaces port-channel
Load balancing: src-dst-mac.
Gathering information...
Channel Ports
------- -----
Po1 Active: 1,Inactive: gi12-3
Po2 Active: 5 Inactive: gi14
[interface-id]
37
738