Show Ip Dhcp Pool Network - Cisco 300 Series Cli Manual

12
305
21 ip 4 134.14.14.1
31 ip-list 8 1.1.1.1, 12.23.45.2
47 hex 5 02af00aa00

12.26 show ip dhcp pool network

To display the DHCP network configuration, use the show ip dhcp pool network
command in User EXEC mode.
Syntax
show ip dhcp pool network [
Parameters
•
name
—(Optional) Specifies the DHCP pool name. (Length: 1-32 characters).
Command Mode
User EXEC mode
Examples
Example 1—The following example displays configuration of all DHCP network
pools:
switchxxxxxx#
show ip dhcp pool network
The number of network pools is 2
Name Address range mask Lease
----------------------------------------------------
marketing 10.1.1.17-10.1.1.178 255.255.255.0 0d:12h:0m
finance 10.1.2.8-10.1.2.178 255.255.255.0 0d:12h:0m
Example 2—The following example displays configuration of the DHCP network
pool marketing:
switchxxxxxx#
show ip dhcp pool network marketing
Name Address range mask Lease
name
]
OL-32830-01 Command Line Interface Reference Guide
DHCP Server Commands