Show Arp Configuration - Cisco 300 Series Cli Manual

22
461
Parameters
•
ip-address
ip-address
•
mac-address
mac-address
•
interface-id —Specifies an interface ID.
Command Mode
Privileged EXEC mode
User Guidelines
Since the associated interface of a MAC address can be aged out from the FDB
table, the Interface field can be empty.
If an ARP entry is associated with an IP interface that is defined on a port or
port-channel, the VLAN field is empty.
Example
The following example displays entries in the ARP table.
switchxxxxxx# show arp
ARP timeout: 80000 Seconds
VLAN Interface
------- ---------------
gi1
VLAN 1 1
gi1
VLAN 1 2
gi1
VLAN 2 1
gi1
2

22.12 show arp configuration

Use the show arp configuration privileged EXEC command to display the global
and interface configuration of the ARP protocol.
Syntax
show arp configuration
Parameters
This command has no arguments or key words.
—Specifies the IP address.
—Specifies the MAC address.
IP Address HW Address
---------- -----------------
10.7.1.102 00:10:B5:04:DB:4B
10.7.1.135 00:50:22:00:2A:A4
11.7.1.135 00:12:22:00:2A:A4
12.10.1.13 00:11:55:04:DB:4B
OL-32830-01 Command Line Interface Reference Guide
IP Addressing Commands
Status
-------
Dynamic
Static
Dynamic
Dynamic