Ip Arp Inspection Vlan - Cisco 300 Series Cli Manual

DHCP Snooping Commands
OL-32830-01 Command Line Interface Reference Guide
Example
The following example enables ARP inspection on the device.
switchxxxxxx(config)#

13.21 ip arp inspection vlan

Use the ip arp inspection vlan Global Configuration mode command to enable
ARP inspection on a VLAN, based on the DHCP Snooping database. Use the no
form of this command to disable ARP inspection on a VLAN.
Syntax
ip arp inspection vlan
no ip arp inspection vlan
Parameters
•
vlan-id
—Specifies the VLAN ID.
Default Configuration
DHCP Snooping based ARP inspection on a VLAN is disabled.
Command Mode
Global Configuration mode
User Guidelines
This command enables ARP inspection on a VLAN based on the DHCP snooping
database. Use the ip arp inspection list assign
inspection.
Example
The following example enables DHCP Snooping based ARP inspection on VLAN
23.
switchxxxxxx(config)#
ip arp inspection
vlan-id
vlan-id
ip arp inspection vlan
command to enable static ARP
23
13
328