Cisco 300 Series Cli Manual page 603

26
603
show ipv6 prefix-list
Parameters
•
detail | summary—Displays detailed or summarized information about all
IPv6 prefix lists.
•
list-name
—Name of a specific IPv6 prefix list.
•
pv6-prefix
i —All prefix list entries for the specified IPv6 network. This
argument must be in the form documented in RFC 4293 where the address
is specified in hexadecimal using 16-bit values between colons.
•
prefix-length
/ —Length of the IPv6 prefix. A decimal value that indicates
how many of the high-order contiguous bits of the address comprise the
prefix (the network portion of the address). A slash mark must precede the
decimal value.
•
longer—Displays all entries of an IPv6 prefix list that are more specific than
the given ipv6-prefix/prefix-length values.
•
first-match—Displays the entry of an IPv6 prefix list that matches the given
ipv6-prefix/prefix-length values.
•
seq seq-num —Sequence number of the IPv6 prefix list entry.
Command Mode
User EXEC mode
Privileged EXEC mode
User Guidelines
If the detail and summary keywords are omitted, the detail option is applied.
If the longer and first-match keywords are omitted, all entries of the specified
prefix list that matches the given network/length are displayed.
Examples
Example 1. The following example shows the output of this command with the
detail keyword:
switchxxxxxx#
ipv6 prefix-list detail
ipv6 prefix-list 6to4:
list-name seq-num
seq
IPv6 Prefix List Commands
OL-32830-01 Command Line Interface Reference Guide