Ipv6 Enable - Cisco 300 Series Cli Manual

IPv6 Commands
OL-32830-01 Command Line Interface Reference Guide
Default Configuration
No default gateway is defined.
Command Mode
Global Configuration mode
User Guidelines
The command is an alias of the
route:
ipv6 route ::/0
See the definition of the
Examples
Example 1. The following example defines a default gateway with a global IPv6
address:
switchxxxxxx(config)#
Example 2. The following example defines a default gateway with a link-local IPv6
address:
switchxxxxxx(config)#
27.7

ipv6 enable

Use the ipv6 enable command in Interface Configuration mode to enable IPv6
processing on an interface.
To disable IPv6 processing on an interface that has not been configured with an
explicit IPv6 address, use the no form of this command.
Syntax
ipv6 enable
no ipv6 enable
ipv6 route
ipv6-address | interface-id
ipv6 route command for details.
ipv6 default-gateway 5::5
ipv6 default-gateway
command with the predefined (default)
FE80::260:3EFF:FE11:6770%vlan1
27
612