Cisco 300 Series Cli Manual page 676

Link Layer Discovery Protocol (LLDP) Commands
OL-32830-01 Command Line Interface Reference Guide
Field
Capabilities
System description
Port description
Management
address
Auto-negotiation
support
Auto-negotiation
status
Auto-negotiation
Advertised
Capabilities
Operational MAU
type
LLDP MED
Capabilities
Device type
LLDP MED - Network Polic
Application type
Description
The capabilities discovered on the neighbor
device. Possible values are:
B - Bridge
R - Router
W - WLAN Access Point
T - Telephone
D - DOCSIS cable device
H - Host
r - Repeater
O - Other
The neighbor device's system description.
The neighbor device's port description.
The neighbor device's management address.
The auto-negotiation support status on the
port. (supported or not supported)
The active status of auto-negotiation on the
port. (enabled or disabled)
The port speed/duplex/flow-control
capabilities advertised by the
auto-negotiation.
The port MAU type.
The sender's LLDP-MED capabilities.
The device type. Indicates whether the
sender is a Network Connectivity Device or
Endpoint Device, and if an Endpoint, to which
Endpoint Class it belongs.
The primary function of the application
defined for this network policy.
30
676