Cisco 300 Series Cli Manual page 824

RSA and Certificate Commands
OL-32830-01 Command Line Interface Reference Guide
Parameters
•
number
—Specifies the certificate number. (Range: 1–2)
•
length
key-generate
RSA key length. (Range: 512–2048)
The following elements can be associated with the key. When the key is
displayed, they are also displayed.
-
cn common- name
address. (Length: 1–64 characters). If unspecified, defaults to the
lowest IP address of the device (when the certificate is generated).
-
ou organization-unit
name. (Length: 1–64 characters)
-
organization
or
characters)
-
location
loc
characters)
-
state
st —Specifies the state or province name. (Length: 1–64
characters)
-
country
cu —Specifies the country name. (Length: 2 characters)
•
duration days —Specifies the number of days a certification is valid. (Range:
30–3650)
Default Configuration
The default SSL's RSA key length is 1024.
common- name
If cn
address (when the certificate is generated), or to the device's lowest static IPv4
address if there is no static IPv6 address, or to 0.0.0.0 if there is no static IP
address.
If duration days is not specified, it defaults to 365 days.
Command Mode
Global Configuration mode
User Guidelines
If the RSA key does not exist, you must use the parameter key-generate.
—Regenerates SSL RSA key and specifies the SSL's
—Specifies the fully qualified device URL or IP
—Specifies the organization-unit or department
—Specifies the organization name. (Length: 1–64
—Specifies the location or city name. (Length: 1–64
is not specified, it defaults to the device's lowest static IPv6
43
824