Errdisable Recovery Interval - Cisco 300 Series Cli Manual

Ethernet Configuration Commands
OL-32830-01 Command Line Interface Reference Guide
Example
The following example enables automatic re-activation of an interface after all
states.
switchxxxxxx(config)#

18.16 errdisable recovery interval

To set the error recovery timeout intervalse the errdisable recovery interval Global
Configuration mode command. To return to the default configuration, use the no
form of this command.
Syntax
errdisable recovery interval
no errdisable recovery interval
Parameters
seconds—Specifies the error recovery timeout interval in seconds. (Range:
30–86400)
Default Configuration
The default error recovery timeout interval is 300 seconds.
Command Mode
Global Configuration mode
Example
The following example sets the error recovery timeout interval to 10 minutes.
switchxxxxxx(config)#
errdisable recovery cause all
seconds
errdisable recovery interval 600
18
402