Wrr-Queue Bandwidth - Cisco 300 Series Cli Manual

39
Quality of Service (QoS) Commands
CoS value 6 is mapped to queue 8
CoS value 7 is mapped to queue 7
The default CoS value mapping to 4 queues is as follows:
CoS value 0 is mapped to queue 1.
CoS value 1 is mapped to queue 1.
CoS value 2 is mapped to queue 2.
CoS value 3 is mapped to queue 3.
CoS value 4 is mapped to queue 3.
CoS value 5 is mapped to queue 4.
CoS value 6 is mapped to queue 4.
CoS value 7 is mapped to queue 4.
Command Mode
Global Configuration mode
User Guidelines
Use this command to distribute traffic to different queues.
Example
The following example maps CoS value 4 and 6 to queue 2.
2 4 6
switchxxxxxx(config)# wrr-queue cos-map

39.18 wrr-queue bandwidth

Use the wrr-queue bandwidth Global Configuration mode command to assign
Weighted Round Robin (WRR) weights to egress queues. The weight ratio
determines the frequency at which the packet scheduler removes packets from
each queue. Use the no form of this command to restore the default configuration.
Syntax
weight1 weight2 weighting
wrr-queue bandwidth ...
761 OL-32830-01 Command Line Interface Reference Guide