Show System - Cisco 300 Series Cli Manual

System Management Commands
OL-32830-01 Command Line Interface Reference Guide
Command Mode
User EXEC mode
User Guidelines
The show sessions command displays Telnet sessions to remote hosts opened by
the current Telnet session to the local device. It does not display Telnet sessions to
remote hosts opened by other Telnet sessions to the local device.
Example
The following example displays open Telnet sessions.
switchxxxxxx> show sessions
Connection Host
---------- -------------
1 Remote router
2 172.16.1.2
The following table describes significant fields shown above.
Field Description
Connection The connection number.
Host The remote host to which the device is connected
through a Telnet session.
Address The remote host IP address.
Port The Telnet TCP port number.
Byte The number of unread bytes for the user to see on
the connection.

50.14 show system

The show system EXEC mode command displays system information.
Syntax
show system
Address Port
---------- -----
172.16.1.1 23
172.16.1.2 23
50
Byte
----
89
8
984