Ip Arp Inspection List Assign - Cisco 300 Series Cli Manual

DHCP Snooping Commands
OL-32830-01 Command Line Interface Reference Guide
Syntax
ip-address mac-address
ip mac
ip-address
no ip mac
Parameters
•
ip-address
—Specifies the IP address to be entered to the list.
•
mac-address
—Specifies the MAC address associated with the IP address.
Default Configuration
No static ARP binding is defined.
Command Mode
ARP-list Configuration mode
Example
The following example creates a static ARP binding.
switchxxxxxx(config)#
switchxxxxxx(config-arp-list)#
switchxxxxxx(config-arp-list)#

13.26 ip arp inspection list assign

Use the ip arp inspection list assign Global Configuration mode command to
assign a static ARP binding list to a VLAN. Use the no form of this command to
delete the assignment.
Syntax
ip arp inspection list assign
no ip arp inspection list assign
Parameters
•
vlan-id
—Specifies the VLAN ID.
mac-address
ip arp inspection list create
172.16.1.1
ip
172.16.1.2
ip
vlan-id name
vlan-id
servers
0060.704C.7321
mac
0060.704C.7322
mac
13
332