Cdp Advertise-V2; Cdp Appliance-Tlv Enable - Cisco 300 Series Cli Manual

CDP Commands
OL-32830-01 Command Line Interface Reference Guide
8.4

cdp advertise-v2

The cdp advertise-v2 Global Configuration mode command specifies version 2 of
transmitted CDP packets. The no format of this command specifies version 1.
Syntax
cdp advertise-v2
no cdp advertise-v2
Parameters
N/A
Default Configuration
Version 2.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)#
switchxxxxxx(config)#
8.5

cdp appliance-tlv enable

The cdp appliance-tlv enable Global Configuration mode command enables
sending of the Appliance TLV. The no format of this command disables the sending
of the Appliance TLV.
Syntax
cdp appliance-tlv enable
no cdp appliance-tlv enable
Parameters
N/A
cdp run
cdp advertise-v2
8
204