Cisco 300 Series Cli Manual page 489

25
489
Syntax
clear ipv6 neighbor binding prefix table [vlan
prefix-address prefix-length
[ /
Parameters
•
vlan-id
—Clear the dynamic prefixes that match the specified VLAN.
•
prefix-address
Command Mode
Privileged EXEC mode
User Guidelines
This command deletes the dynamic entries of the Neighbor Prefix table.
Use the clear ipv6 neighbor binding prefix table vlan
prefix-address prefix-length
/
Use the clear ipv6 neighbor binding prefix table vlan
the dynamic entries that match the specified VLAN.
Use the clear ipv6 neighbor binding prefix table command to delete all dynamic
entries.
Examples
Example 1. The following example clears all dynamic entries:
switchxxxxxx# clear ipv6 neighbor binding prefix table
Example 2. The following example clears all dynamic prefixes that match VLAN
100:
switchxxxxxx# clear ipv6 neighbor binding prefix table vlan 100
Example 3. The following example clears one specific prefix:
switchxxxxxx# clear ipv6 neighbor binding prefix table vlan 100
2002:11aa:0000:0001::/64
]
prefix-length
/ —Clear the specific dynamic prefix.
command to delete one specific entry.
OL-32830-01 Command Line Interface Reference Guide
IPv6 First Hop Security
vlan-id
]
vlan-id
vlan-id
command to delete