Show Ipv6 Mld Snooping Interface - Cisco 300 Series Cli Manual

MLD Snooping Commands
OL-32830-01 Command Line Interface Reference Guide
Example
The following example shows the output for show ipv6 mld snooping groups.
switchxxxxxx#
show ipv6 mld snooping groups
VLAN Group Address Source Address
---- -------- ---------------------
1 FF12::3 FE80::201:C9FF:FE40:8001
1 FF12::3 FE80::201:C9FF:FE40:8002
19 FF12::8 FE80::201:C9FF:FE40:8003
19 FF12::8 FE80::201:C9FF:FE40:8004
19 FF12::8 FE80::201:C9FF:FE40:8005
MLD Reporters that are forbidden statically:
VLAN Group Address Source Address
---- ----------- ---------------------
1 FF12::3 FE80::201:C9FF:FE40:8001
19 FF12::8 FE80::201:C9FF:FE40:8001

34.13 show ipv6 mld snooping interface

To display the IPv6 MLD snooping configuration for a specific VLAN, use the show
ipv6 mld snooping interface EXEC mode command in User EXEC mode.
Syntax
show ipv6 mld snooping interface
Parameters
•
vlan-id —Specifies the VLAN ID.
Default Configuration
Display information for all VLANs.
Command Mode
User EXEC mode
Include Ports
-----------
gi11
gi12
gi14
gi11
gi110-11
Ports
--------
gi13
gi14
vlan-id
34
Exclude Ports Compatibility
Mode
----------
-------------
1
1
2
gi12
2
gi13
2
716