File-System Logging - Cisco 300 Series Cli Manual

SYSLOG Commands
OL-32830-01 Command Line Interface Reference Guide
Default Configuration
None
Command Mode
Privileged EXEC mode
Example
The following example clears messages from the logging file.
switchxxxxxx# clear logging file
Clear Logging File [y/n]

49.4 file-system logging

To enable logging file system events, use the file-system logging Global
Configuration mode command. To disable logging file system events, use the no
form of this command.
Syntax
{copy | delete-rename}
file-system logging
no file-system logging
Parameters
•
copy—Specifies logging messages related to file copy operations.
•
delete-rename—Specifies logging messages related to file deletion and
renaming operations.
Default Configuration
Enabled.
Command Mode
Global Configuration mode
{copy | delete-rename}
49
956