Cisco 300 Series Cli Manual page 798

Stackable managed switches

Hide thumbs Also See for 300 Series:

Table of Contents

Remote Network Monitoring (RMON) Commands

OL-32830-01 Command Line Interface Reference Guide

type {absolute | delta}—(Optional) Specifies the method used for sampling

the selected variable and calculating the value to be compared against the

thresholds. The possible values are:

absolute—Specifies that the selected variable value is compared

directly with the thresholds at the end of the sampling interval.

delta—Specifies that the selected variable value of the last sample is

subtracted from the current value, and the difference is compared with

the thresholds.

startup {rising | rising-falling | falling}—(Optional) Specifies the alarm that

may be sent when this entry becomes valid. The possible values are:

rising—Specifies that if the first sample (after this entry becomes valid)

is greater than or equal to rising-threshold, a single rising alarm is

rising-falling—Specifies that if the first sample (after this entry becomes

valid) is greater than or equal to

generated. If the first sample (after this entry becomes valid) is less than

or equal to falling-threshold, a single falling alarm is generated.

falling —Specifies that if the first sample (after this entry becomes valid)

is less than or equal to falling-threshold, a single falling alarm is

—(Optional) Specifies the name of the person who configured

this alarm. (Valid string)

Default Configuration

The default method type is absolute.

The default startup direction is rising-falling.

If the owner name is not specified, it defaults to an empty string.

Command Mode

Global Configuration mode

The following example configures an alarm with index 1000, MIB object ID D-Link,

sampling interval 360000 seconds (100 hours), rising threshold value 1000000,

rising-threshold

, a single rising alarm is