Each Component Of The Library; Configuration Of The Basic Model Components; Figure 1.7 Configuration Diagram Of The Standard Model Components - Fujitsu ETERNUS LT160 User Manual

1.1.3

Each component of the library

This section explains the physical location of each element in the library, namely, the
cell, drive, and CAS (Cartridge Access Station) and their element addresses.

1.1.3.1 Configuration of the basic model components

The following figure shows the physical location of each component of the basic model.

Figure 1.7 Configuration diagram of the standard model components

DRIVE: a and b are drive columns.
CAS: Cartridge Access Station.
CELL: The number is a column number.
C144-E072-01EN
For information on the configuration diagram of each model, see
Appendix A, "Model Configuration."
Basic cabinet rear
DRIVE DRIVE
a b
CELL
CELL CELL
0
1 2
Basic cabinet
CELL CELL CELL
5 4 3
CAS a
Basic cabinet front
1.1 Device Configuration
Remarks:
CELL
6
CELL
7
CELL
8
1-7