Power Saver Settings; Setting / Changing The Power Saver Time Intervals - Xerox Versant 80 Press System Administration Manual

7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
10. Select another item to set or change and repeat the previous steps as needed.
11. Select Close.
The main Tools screen displays.
12. Exit the administrator mode.

Power Saver Settings

Setting / Changing the Power Saver Time Intervals

Note
The time intervals for both the Low Power and Sleep modes may be changed to reflect
a value of 1-240 minutes for each mode. Through System Settings, you can also change
or set other options such as deactivating the feature or saving power after printing
completes.
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Power Saver Settings.
6. Select Power Saver Timers.
7. Select Change Settings.
8. Specify the time interval for both low-power mode and sleep mode:
a) From Last Operation to Low Power Mode: The default time is 1 minute. Specify
the amount of time between the last operation and when entering low-power
mode. Select from 1 through 240 minutes, in 1 minute increments.
The time From Last Operation to Low Power mode must not exceed the time From
Last Operation to Sleep Mode.
b) From Last Operation to Sleep Mode: The default time is 1 minute. Specify the
amount of time between the last operation and when entering into the Sleep
mode. Select from 1 through 240 minutes, in 1 minute increments.
Ensure that the Sleep mode interval is set with a longer amount of time than Low
Power mode.
9. Select Save.
10. Select Close.
The main Tools screen displays.
11. Exit the administrator mode.
Xerox ® Versant ® 80 Press
System Administration Guide
System Settings (Tools Administrator Mode)
4-5