Emulation Menu - Xerox Phaser 3428 User Manual

Emulation menu

Use the Emulation menu to configure printer language emulation.
Item
Emulation
Values: Auto, PCL, PostScript, EPSON, IBM
Type
ProPrint
The printer language defines how the computer
communicates with the printer.
If you select Auto, your printer can change the
printer language automatically.
Note
This PostScript is available only with the
Phaser 3428/DN.
Setup
Values: PCL, PostScript, EPSON
See the tables on page 2.5 to configure the printer
language.
Note
This PostScript is available only with the
Phaser 3428/DN.
PCL
This menu sets the PCL emulation configuration. You can set the font
type, symbol type, lines per page, and point size.
Item
Typeface
Values: PCL1 ~ PCL68
You can select the standard font to be used in PCL
emulation.
• PCL1~PCL7's interval between letters is fixed, and
PCL8~PCL45's interval is proportional to the font
type and point size. You can adjust the font size of
PCL1~PCL7, PCL55, PCL56 using the Pitch item,
and PCL8~PCL45, PCL57~PCL68 can do using
item.
Point Size
• PCL46~PCL54's interval and point size are fixed.
Symbol
Values: ROMAN8 ~ PC737
This item selects the symbol to be used in PCL
emulation. The symbol is the group of numbers,
marks, and special signs being used when printing
letters.
Point Size
Values: 4.00 ~ 999.75 (0.25 unit)
When you select one between PCL8 and PCL45 from
the Typeface menu, you can determine the font size by
setting the height of the characters in the font.
Explanation
Explanation
Item
Courier
Values: Regular, Dark
This item lets you select the version of Courier font to
use.
Pitch
Values: 0.44 ~ 99.99 (0.01 unit)
When you select one between PCL1 and PCL7 from
the Typeface menu, you can determine the font size by
setting the number of characters that will print in one
horizontal inch of type. The default value, 10 is the
best size.
Lines
Values: 5 ~ 128
This item allows you to set vertical spacing from 5 to
128 lines for the default paper size. The lines may
differ according to the paper size and printing
orientation.
PostScript (Phaser 3428/DN only)
This menu provides you with the Print PS Error menu item.
Item
Print PS
Values: On, Off
Error
You can select whether or not your printer prints an
error list when a PS error occurs.
• Select On to print PS 3 emulation errors. If an error
occurs, the job stops processing, the error message
prints, and the printer flushes the job.
• If this menu is set to Off, the job is flushed without an
indication of the error.
EPSON
This menu sets the EPSON emulation configuration.
Item
Font
Values: SANSERIF, ROMAN
You can select the standard font will be used in
EPSON emulation.
Character
Values: USA, FRANCE, GERMANY, UK,
Set
DENMARK1, SWEDEN, ITALY, SPAIN1, JAPAN,
NORWAY, DENMARK2, SPAIN2, LATIN
This item allows you to select a character set of the
desired language.
2.5
<System setup>
Explanation
Explanation
Explanation