Interface Module (D110/D125 Configurations); Interface (Cooling) Module (D136 Configuration) - Xerox D125 User Manual

Product Overview
Note
The 1-Tray OHCF is not available with D136 configurations.

Interface Module (D110/D125 configurations)

The Interface Module is required with many finishing devices. It enables communication
and provides a paper path between the print engine and any attached finishing device
or devices.
Note
The Interface Module is not available with the D95 Copier/Printer configuration.

Interface (Cooling) Module (D136 configuration)

The Interface Cooling Module is required for all D136 configurations. It is similar in
function to the Interface Module (for D110/D125 configurations), but it also aids in
cooling the outgoing printed media through the use of additional fans and associated
duct work.
1-8 User Guide