Proof/Print Menus; Entering The Password - Xerox Phaser 6120 Service Manual

PROOF/PRINT MENUS

With this menu item, print jobs that were set to be saved on the hard drive by using Job
Retention on the Basic tab of the printer driver can be printed or deleted.
Note:
This setting is available only when an optional hard drive is installed.
SECURED
"Job name"
PRINT
PIN
XXXX *2
COPIES
*1: If no jobs have been stored on the hard drive, NO STORED JOBS appears.
*2: In order to print or delete a secured job, enter the four-digit password specified from the
printer driver. For details on entering the password, refer to "Entering the password."

Entering the Password

In order to print or delete a secured job, the four-digit password specified from the printer
driver must be entered. Follow the procedure described below.
1.
Press the Up or Down keys to increase or decrease the first digit of the password.
2.
Press the Right key to move the cursor to the next digit.
3.
Press the Up or Down keys to increase or decrease the second digit of the password.
4.
Continue these steps until all four digits of the password are specified.
5.
Press the Menu/Select key.
The PRINT/DELETE selection screen appears.
Note:
If an incorrect password is entered, INVALID ENTRY appears and the screen for
entering the password appears again.
Phaser® 6120 Color Laser Printer Service Manual
MENU
PROOF/PRINT MENU *1
"User name"
PROOF/PRINT
"Job name"
DELETE PRINT DELETE
PIN
COPIES
XXXX *2
3-13
PRINT/HOLD STORED
"Job name" "Job name"
PRINT DELETE PRINT DELETE
COPIES COPIES
Menu Map
4139fs3526e0