Menu Maps; Control Panel Shortcuts - Xerox Phaser 8400 Service Manual

Menu Maps

The Customer Menu Map helps you navigate the Control Panel menus. The Menu
Map's are provided in the appendix section of this manual, see page A-2.
To print the Menu Map:
1.
On the Control Panel, select Information, and then press the OK button.
2. Select Menu Map, and then press the OK button to print.
The service diagnostic menu map is detailed in Section 4, see "Service Diagnostics"
on page 4-4 for more information.

Control Panel Shortcuts

Mode or Menu Item
Service Tools Menu
Service (Internal)
Diagnostics
Set Control Panel
language
Bypass protected
menus
Jet Substitution Mode
FTTR (Fast Time To
Ready)
1-6
Shortcut
On the Control Panel, press the Down Arrow button and select
Troubleshooting and press OK.
Then, press the Down Arrow button to select
then press OK.
(Phaser 8400) Hold the Back and Info button at power up (for about
30 seconds).
(Phaser 8500/8550) Wait until Control Panel screen turns black, and
then press and hold Back and Help buttons until the message
"Beginning Service Mode" displays.
Press and hold the Cancel button, and then press the Help button.
Press and hold the Cancel button, and then press the Back button.
(Phaser 8400 only) To add Jet Substitution Mode to the Print
Quality Problems menu:
From the Print Quality Problems menu: press and hold the Up Arrow
button, and then press the Back button .
Phaser 8500/8550 have Jet Substitution in the main menu system
(under Eliminate Light Stripes).
Printer goes to the ready state without waiting for thermal
temperatures to reach the proper operating values. On power-up,
when the Xerox splash screen displays, press and release the Up
Arrow button, then press the Down Arrow button. If the printer
detects ink on the drum, the display indicates a warming-up status.
Phaser 8400/8500/8550 Color Printer
Service Tools and