Replacing The Fuser Assembly - Xerox DocuPrint N2125 System Administrator Manual

Maintenance Kit Instructions
Replacing the
Fuser Assembly
4-14 System Administrator Guide
The fuser is used for fusing toner onto paper, and has a life
expectancy of approximately 200,000 impressions
(though, depending on how the printer is used, it may
require replacement before that number is reached).
To replace the fuser with a new one, follow the steps listed
below.
To avoid electric shock, be sure to power off and
unplug the printer before beginning this procedure.
To avoid burns, wait at least 40 minutes after
powering off the printer to allow the fuser to cool
down, and observe warning labels inside the
printer.
1 Power off the printer and disconnect the power cord.