Table of Contents
Advertisement
Setting Up Complex Jobs
8. Load ordered stock that matches the settings you made in the Tray Properties window.
For information on proper loading, see
9. Click OK or Apply.
Submit job and choose ordered stock
With a tray properly loaded and configured with loaded stock, you are ready to submit a job which uses
ordered stock.
1. Initiate a print or copy job. For example, on a copy job, select Loaded Stock from the Paper Stock
menu on the Basic tab.
2. A list of loaded stock types appears. Choose the ordered stock you previously configured and loaded.
3. Make any other programming choices.
4. When satisfied with your settings, click Copy or Print.
Note
When using tabbed or ordered stocks the system may instruct you to reorder the stock in the tray to the
first position if events such as a multifeed occur. Any time a tray containing ordered stock is cycled, the
system assumes that the stock in the tray has been reset to the first position.
Use Media Optimization Mode to optimize job recovery on jobs with Serialized Stocks
You can print jobs using serialized stocks, such as checks or statements, and disable auto system job
recovery. The system will require more active operator intervention to manually insure proper job recovery
following system shutdowns. A message will indicate when this media optimization mode is enabled.
If a system fault condition occurs and requires a dynamic purge of sheets, the machine will shut down
after the purge is completed. Similarly, if the system shuts down hard with a fault condition, after clearing
the jam the system will cycle up, purge the paper path contents, and shut down again. After both of
these two types of conditions, a status message will display to instruct the operator about job recovery.
Be sure to disable Serialized Stock Mode when finished to restore full auto job recovery.
To enable Serialized Stocks mode:
1. From the FreeFlow Print Server user interface, select Printer > Media Optimization.
The window containing all selections displays. Serialized Stock is above the area containing Media
Optimization Switches.
2. Select Serialized Stock Mode and OK.
You are now running in Serialized Stock mode which will print your job as programmed and will only
prompt you for job recovery assistance following a system fault condition.
3. When you have completed running jobs that include serialized stock, make sure you exit the Serialized
Stock mode by selecting Printer > Media Optimization and clearing Serialized Stock Mode from
inside the window containing the selections.
For more information, see
Perfecting Production
System.
More on loading tabbed stock and other special papers
Load stock in the orientation indicated on the feed tray labels.
12-4
Recommendations for Paper
Using Media Optimization Mode on the Xerox Nuvera 200/288 EA/MX
Usage.
Xerox
User Guide and Training Aid (UGTA)
®
Nuvera
®
Advertisement
Table of Contents
