Loading Cut Sheet Paper (Bypass); Switching Between Trays - Xerox Wide Format 6705 System User Manual

1.7.2
When using cut sheets for copy or print, load the cut sheet via the bypass (manual) feed table.
When changing the media type, size, or weight, make sure that you change the media settings before

Important
proceeding operations. For information on how to do this, refer to "Paper Tray Series / Paper Type" (p. 208).
Paper of up to 2,000 mm in length can be loaded.

Note
1
Steps
St
1.
Fold the bypass (manual) feed table toward you to open it.
2.
Align the right edge of the paper against the scale, and insert the
paper until you hear a beep.
The paper is automatically conveyed and stops.
Important
1.7.3
When the selected tray has run out paper, you can manually switch to another tray to continue printing.
Steps
St
1.
Press [Paper Supply].
1.7 Loading/Replacing Paper
48

Loading Cut Sheet Paper (Bypass)

Load paper one sheet at one time.

If paper is curled, hold the curled corners with both

hands when inserting the paper.
Do not release your hands from the paper until it is

conveyed. If you release your hands when you hear a
sound, the paper may get jammed.

Switching Between Trays