Fax Billing Data; Passcode Entry From Control Panel - Xerox ApeosPort-II 5010 User Manual

Table of Contents

Advertisement

Save in Charge Print
Regardless of whether the authentication feature is being used or not, all received jobs are
saved using the Charge Print feature.
Note
• When [Save in Charge Print] is selected, the Security Print, Sample Print, Mailbox Print, and

Fax Billing Data

You can make settings for the fax billing.
Important • In order to register the billing data, enable the fax feature for the Login Setup/Auditron
Note
• Set the communications time per unit charge in each time band (daytime/night/midnight) in
• The registered details can be confirmed by printing the [Billing Data List]. For information
1
Enter the System Administration
mode.
For details on how to enter the System
Administration mode, refer to "System
Settings Procedure" (P.254).
2
Select [Fax Billing Data] and select
[Change Rate per Unit].
Charge Rate per Unit
This is a communication charge per unit.
3
Select [Change Settings].
4
Enter an amount using the
keyboard displayed on the screen
or the numeric keypad.
5
Select [Save].

Passcode Entry from Control Panel

You can set whether a passcode is required when the system administrator or a user
uses the machine. Select [On] to enable "System Administrator's Passcode" (P.337),
and "Passcode" (P.340) for [Create/Check User Accounts].
Select [Off] not to require the passcode, even if a passcode is set in the above
procedures.
Important • The setting of [Passcode Entry from Control Panel] is used for authentication on the
Note
• The system administrator's passcode is also required when you change settings from
Delayed Print settings specified on the print driver will be ignored.
Administration prior to the operations. For details on how to enable the fax feature, refer to
"Auditron Mode" (P.347).
[Billing]. For information on how to set [Billing], refer to "Billing - Day Time, Billing - Night
Time, Billing - Midnight" (P.333).
about how to print, refer to "Billing Data List" (P.378).
machine. A passcode must always be entered when accessing from remote devices using
CentreWare Internet Services or the like, regardless of the use of passcode setting.
Depending on authentication procedures, a passcode may be required for other processes
as well.
CentreWare Internet Services.
Login Setup/Auditron Administration
10
345

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apeosport-ii 4000Apeosport-ii 3000

Table of Contents