Sample Print - Xerox ApeosPort-II 5010 User Manual

11 Job Status
Print Quantity
Allows to specify the number of print sets.
Note

Sample Print

This section describes how to print or delete documents stored with the Sample Print
feature.
After a sample copy is output, the remaining copies will automatically be output if the
machine is left uninstructed for the period specified under [Auto Job Release]. You can
change the value of [Auto Job Release] as necessary.
For information on sample print operations, refer to the print driver's help.
11
Note
For more information, refer to Charge / Private Print Settings (P.343).
1
Select [Sample Print].
2
Select the user to be checked, and
select [Document List].
Note
3
Select the document to be printed
or deleted.
4
Select any item.
Select All
Selects all documents. To deselect all the documents, select this button again.
Delete
Deletes the selected document.
Refer to When [Delete] is Selected (P.359).
Print
Prints a Sample Print document. After printing the remaining sets of the document, the
stored Sample Print document is deleted.
Refer to When [Print] is Selected (P.359)
358
• [Print Quantity] is disabled when you use [Select All] to select all documents.
• When you select [Print and Save], the setting of [Print Quantity] is also saved.
• When you have selected [Save in Private Charge Print] or [Save in Charge Print] for
[Receive Control] under [Charge/Private Print Settings], jobs will not be saved in [Sample
Print] under [Stored Documents] even if you select [Sample Print] on the print driver.
• Select [Refresh] to display the
updated information.
• Select [ ] to return to the previous screen or [
• Entering a 3-digit user ID with the numeric keypad specifies the user directly.
] to move to the next screen.