Last Fax Data Reprint - Xerox WorkCentre Pro 385 User Manual

3
Press 1 to turn Econo Mode ON or, 2 to turn Econo Mode OFF.
Note: Print quality may be reduced when using Econo Mode.
4
The LAST FAX DATA REPRINT ? setup menu selection is displayed.
Refer to the next section, Last Fax Data Reprint for configuration
details.
5
To return to Standby mode, press the Stop button.

Last Fax Data Reprint

If the toner is low or empty, the received fax page may be too light to read
the message. If the fax message was lost because of low or empty toner, use
the Last Fax Data Reprint feature to print the last fax data. Your machine
continuously stores the last 10 pages of received fax data, and updates the
pages each time you receive a fax.
1
Press the Menu button, then press the System Setup button on the One-
Touch keypad. The display indicates RINGER VOLUME ?.
2
Press the Up or Down button until LAST FAX DATA REPRINT ? is
displayed, then press Enter.
.
3
Press 1 to print the last 10 pages of received fax. If you want to clear
the data to save memory, press 2. After clearing memory, full memory
is available until a new fax is received.
4
The FLASH DOWNLOAD ? setup menu item is displayed. Press the
Stop button.
LAST FAX DATA
1:PRINT 2:CLEAR
System Setup 1-39
1