Screen/Button Settings - Xerox ApeosPort-II 5010 User Manual

Base Tone
For a button that toggles (changes setting each time it is pressed), set the sound to be made
when in the home position. The machine makes this sound when it exits the Interrupt mode.
You can select the volume from [Soft], [Normal], and [Loud]. To disable the sound, select
[Off].

Screen/Button Settings

Set screens and buttons.
Screen Default
Set the features displayed on the screen that appears after turning the machine on or
canceling the Power Saver mode.
For more information, refer to "Customizing the Control Panel" (P.48).
Screen After Auto Clear
Set the screen displayed after Auto Clear.
For more information, refer to "Customizing the Control Panel" (P.48).
Auto Display of Login Screen
When the authentication feature is used, set whether or not to automatically display the login
screen after turning the machine on or canceling the Power Saver mode.
All Services
Set the layout of buttons that appear on the [All Services] screen when pressing the <All
Services> button on the control panel.
The layout of buttons in this screen is corresponding to the layout of those on the [All
Services] screen.
For more information, refer to "Customizing the Control Panel" (P.48).
Note • It is not possible to assign the same feature to more than one button.
Services
You can select a feature button. The feature buttons are the oval buttons in the [All Services]
screen.
If you select [Not Set], the selected button position will remain empty.
Additional Features
You can select an additional feature button. The additional features appear in the [All
Services] screen as rectangular buttons.
If you select [Not Set], the selected button position will remain empty.
Custom Buttons 1 to 3
You can assign features such as Copy and Fax to the custom buttons on the control panel:
Custom Button 1 to Custom Button 3.
To leave a feature unassigned, select [Not Set].
For more information, refer to "Customizing the Control Panel" (P.48).
Note • The operation settings can be registered in the [Stored Programming] screen. For
• The default setting of [Custom Button 1] is [Copy].
Job Type on Job Status Screen
Select the job types to be shown on the [Completed Jobs] screen of the [Job Status] screen
that is displayed when the <Job Status> button on the control panel is pressed.
Select from [All Jobs], [All Non-Printing Jobs], [Mailbox Transfer Jobs], and [All Printing Jobs].
information on Stored Programming, refer to "Registering Stored Programs" (P.220).
Common Settings
10
271