Step 3 Entering A Quantity; Step 4 Starting The Copy Job - Xerox ApeosPort-II 5010 User Manual

Step 3 Entering a Quantity

You can enter up to 999 for the number of copies.
1
Enter the number of copies using
the numeric keypad. The number
of copies entered appears on the
upper right of the touch screen.
2
If you enter an incorrect value,
press the <C> button and then
enter the correct value.

Step 4 Starting the Copy Job

1
Press the <Start> button.
Important • If the document has been set
• Copies cannot be made if a
Note • If a problem occurs, an error
• You can set the next job during copying.
If you have more documents
If you have more documents to copy, select [Next Original] on the touch screen while
the current document is being scanned. This allows you to scan the documents as a
single set of data.
2
Select [Next Original] while
scanning is in progress.
Note • When using the document feeder, load the next document after the machine has finished
• When the above screen is displayed and no operation is performed during a certain period
in the document feeder, do not
hold down the document while
it is being conveyed.
copy protection code is
detected.
message appears in the touch
screen. Solve the problem in accordance with the message.
scanning the first document.
of time, the machine automatically assumes that there are no more documents.
Copying Procedure
1 2 3
4 5 6
7 8 9
0 #
C
1 2 3
4 5 6
7 8 9
0 #
C
1 2 3
4 5 6
7 8 9
0 #
C
Numeric keypad
<C> button
3
<Start> button
57