General Settings; Lighten/Darken (Adjusting The Scan Density); Sided Originals (Scanning Both Sides Of A Document) - Xerox ApeosPort-II 5010 User Manual

5 Scan

General Settings

The [General Settings] screen displayed for [E-mail], [Scan to Mailbox], and [Scan to
PC] allows you to set basic features. The following shows the reference section for
each feature.

Lighten/Darken (Adjusting the Scan Density)..........................................................................190

2 Sided Originals (Scanning Both Sides of a Document).........................................................190

Original Type (Selecting the Document Type).........................................................................192
File Format (Selecting a File Format for Output Data) ............................................................192
Note
1
On the [All Services] screen, select
[E-mail], [Scan to Mailbox], or
[Scan to PC].
2
Select the [General Settings] tab,
and then select a feature on the
[General Settings] screen.
Lighten/Darken (Adjusting the Scan Density)
You can select a scan density level from seven levels. Moving the
position makes the scan density lower, and moving to the lower position makes the
density higher.
1
5
Use [
density.
2 Sided Originals (Scanning Both Sides of a Document)
You can automatically scan both sides of a 2-sided document.
By setting the binding style, both sides are scanned in the same orientation.
Note
1
Select any item.
1 Sided
Select this to scan only one side of the document.
2 Sided (H to H)
Select this when both sides of the 2-sided document are in the same orientation.
190
• When you select [Scan to Mailbox], [File Format] is disabled.
] and [ ] to adjust the
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
mark to the upper