Xerox ApeosPort-II 5010 User Manual page 46

2 Product Overview
4
Select [System Settings].
5
Select [Common Settings].
6
Select [Machine Clock/Timers].
2
7
Select [
8
Select [Auto Power Saver], and select [Change Settings].
9
Using [
power saver mode migration time
in 1 minute increments.
From Last Selection to Low Power Mode
Set the time to move to the [Low Power Mode] after the last operation.
Note
From Last Selection to Sleep Mode
Set the time to move to the [Sleep Mode] after the last operation.
Note
10
Select [Save].
11
Select [Close] repeatedly until the [System Settings] screen is displayed.
12
Select [Exit] to exit the System Administration mode.
44
].
] and [ ], configure a
• The default for [From Last Selection to Low Power Mode] is [2] minutes. The Low Power
Mode cannot be disabled.
• The default for [From Last Selection to Sleep Mode] is [2] minutes. Configure the [From Last
Selection to Sleep Mode] time to be longer than the [From Last Selection to Low Power
Mode] time.