Entering Specific Symbols; Removing/Confirming A Recipient - Xerox ApeosPort-II 5010 User Manual

3
Press the <Start> button.
Note • The port numbers are "1", line 2 (LINE 2 jack)
• You can specify line 2 and line 4 when an option is installed.

Entering Specific Symbols

When specifying a recipient, you can use the following features to enter specific
symbols from the touch screen.
Feature
Enter pause
Transmit using a
password
Transmit DTMF
signal
Transmit PB
(from dial pulse
to tone)
Note • When using the DTMF method, use specific symbols. For information on the DTMF method,

Removing/Confirming a Recipient

You can remove or confirm recipients using the pop-up menu.
1
Select the recipient to be removed
or confirmed from [Address/
Recipient].
2
Select any item from the pop-up
menu.
Button
- or
<Pause> (-)
S
!
:
refer to "Remote Mailbox (Using Remote Mailbox)" (P.147), and "Broadcast" (P.158).
"2" and line 4 (LINE 4 jack)
Function
One pause is 3 seconds.
You can enter pauses of
6 seconds, 9 seconds,
etc. by additional button
presses.
When a password has
been set, transmission
will only start if the
password matches the
ID number on the remote
terminal.
Use to transmit the
DTMF signal.
Switches the dial type
from pulse to tone when
the Fax service is used.
Fax/Internet Fax
"4".
Input method
Press the <Pause>
button.
(Example)
0-123 ...
0--123 ...
1. Select [Keyboard] in
the [Fax/Internet Fax]
screen to display the
keyboard.
2. Select [S].
(Example)
0312345678S12345678
1. Select [Keyboard] in
the [Fax/Internet Fax]
screen to display the
keyboard.
2. Select [More
Characters].
3. Select [!].
(Example)
0311123456!123#
1. Select [Tone (:)] on
the [On-hook] or [Off-
hook] screen.
127
4