Xerox ApeosPort-II 5010 User Manual page 430

15 Problem Solving
Unable to copy
with the specified
size.
15
428
Symptom Cause
Is the document glass or the
document cover dirty?
Is the document a
transparent type such as a
transparency film?
Is the document in the
correct position?
Is the document loaded
correctly?
Are the document guides on
the document feeder in the
correct positions?
Is the document folded?
Is the document a non-
standard size?
Remedy
Clean the document glass and the
document cover.
Refer to "Cleaning the Document Cover and
Document Glass" (P.419).
Place the document on the document
glass, and then place a white sheet over
the document.
Load the document correctly.
Refer to "Step 1 Loading Documents" (P.54).
Adjust the document guide positions.
Refer to "Step 1 Loading Documents" (P.54).
Unfold and correctly place the document.
Refer to "Step 1 Loading Documents" (P.54).
Specify the document size.
Refer to "Original Size (Specifying the Scan
Size for the Document)" (P.72).