Xerox ApeosPort-II 5010 User Manual page 153

Note • Mailbox reception using the DTMF method is possible, but the only signals that can be
• It may be possible to automatically print a document received in the mailbox depending on
• Depending on the report print settings, the [Mailbox Report] may not be printed even if e-
For information on printing received documents, refer to "Printing/Deleting Documents in the Mailbox"
(P.210).
Sending to Mailbox (F Code Method)
1
Select [F Code] on the
[Transmission Options] screen.
2
Select [On].
3
Use numeric keys to enter an F
code, and select [Next].
Note • An F code must be up to 20 digits.
4
If required, enter a password into [Password], and then select [Next].
Note • A password must be up to 20 digits.
Off
The F code transmission is not used.
On
The F code transmission is used. Enter the F Code.
F Code
Enter the F code using the numeric keypad.
Note • You can enter up to 20 digits for the F Code.
Password
Enter the password using the numeric keypad. If a password has not been set, you do
not need to enter one.
Note • You can enter up to 20 digits for the password.
Next
Select this button after entering [F Code] and [Password].
Private Polling (F Code Method)
1
Select [F Code] on the
[Transmission Options] screen.
2
Select [On].
3
Enter the F Code with the numeric
keypad and select [Next].
Note • You can enter up to 20 digits for the F Code.
4
If necessary, enter the password using the numeric keypad and select [Next].
Note • You can enter up to 20 digits for the password.
5
Select [Save].
received are numerals, ∗, and #.
the mailbox settings. For information about setting the mailbox, refer to "Mailbox" (P.322).
mail is received in the mailbox. For information on setting the report print settings, refer to
"Reports" (P.277).
Transmission Options
4
151