Xerox ApeosPort-II 5010 User Manual page 461

Category
Error Code
C P F S M O
016-591
016-592
016-593
016-594
016-595
016-596
016-597
016-700
O
016-702
O
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because the filing policy was invalid.
[Remedy] When [File Name Conflict] is set to [Change Name and
Save], make sure the file format is not Multiple-Page.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because access to the
NEXTNAME.DAT file was not successful after connection
to the FTP server.
[Remedy] When [File Name Conflict] is set to [Change Name and
Save], check the NEXTNAME.DAT file is correct.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because an internal error occurred
after connection to the FTP server.
[Remedy] Try again. If the error persists, contact our Customer
Support Center.
O [Cause] The machine failed to transfer data using [FTP] of the
[Scan to PC] feature because a network error occurred.
[Remedy] Try again. If the error persists, contact our Customer
Support Center.
O [Cause] The transfer processing using [FTP] of the [Scan to PC]
feature was cancelled after connection to the FTP server,
because the same file or folder name existed.
[Remedy] Make sure that the multiple machines are not accessing
the same folder on the server, then try again. If the error
persists, contact our Customer Support Center.
[Cause] The job was suspended because the number of the digits
for the Security Print or Charge Print passcode set on the
print driver was less than the value specified in [Min.
Passcode Length for Stored Job] on the machine.
[Remedy] On the print driver, set the passcode string equal to or
longer than the value specified in [Min. Passcode Length
for Stored Job].
[Cause] Unable to process print data due to insufficient print page
buffer.
[Remedy] Take one of the following actions:
Set [Print Mode] to [Normal].
Set [Page Print Mode] to [On].
Increase the print page buffer size.
Add on memory.
For information about the Print Mode and the Page Print Mode, refer to the
print driver's online help. For information about memory, refer to "Allocate
Memory" (P.297).
Cause and Remedy
Error Code
15
459