Xerox ApeosPort-II 5010 User Manual page 568

16 Appendix
Parameter
Symbol Set
Font Size
Font Pitch
Form Line
Print Sets
Image Enhance
16
Hex Dump
Draft Mode
Binding
Line Termination
Default Custom
Paper Size
566
Item No.
208 0 (Default): Roman 8
1: ISO 8859-1 Latin 1
2: ISO 8859-2 Latin 2
3: ISO 8859-9 Latin 5
4: ISO 8859-10 Latin 6
5: PC-8
6: PC-8 DN
7: PC-775
8: PC-850
9: PC-852
10: PC-1004 (OS/2)
11: PC Turkish
12: Windows 3.1 Latin 1
13: Windows 3.1 Latin 2
14: Windows 3.1 Latin 5
15: DeskTop
16: PS Text
17: MC Text
209 400 - 5000 (Default: 1200): Specifies the point size of a font in increments
of 25. The value of 100 represents 1 point.
210 600 - 2400 (Default: 1000): Specifies the pitch size of a font. The value of
100 represents the pitch size of 1.
211 5 - 128 (Default: 64 or 60*): Specifies the number of lines on a page.
* The default value will be [64] if the default value of the item 202/203 is
[4]; [60] if the value for 202/203 is [23].
212 1 - 999 (Default: 1): Specifies the number of print sets.
213 0: Off
1 (Default): On
Sets whether to enable the enhanced image mode.
214 0 (Default): Off
1: On
Sets whether to enable hex dump.
215 0 (Default): Off
1: On
Sets whether to enable the draft mode.
217 0 (Default): LEF
1: SEF
Specifies which edge of paper is to be bound.
218 0 (Default): Off
1: Add-LF (Appends an LF to CR)
2: Add-CR (Appends a CR to LF and FF)
3: CR-XX (Appends a CR to LF and FF, and LF to CR)
219 2100 (Default short-edge value): 210.0 mm
(Short edge) 2970 (Default long-edge value): 297.0 mm
0 to 9999: 0 to 999.9 mm
220
(Long edge)
Specifies the default custom paper size.
Value
18: Microsoft Publishing
19: Math 8
20: PS Math
21: Pi Font
22: Legal
23: ISO 4 United Kingdom
24: ISO 6 ASCII
25: ISO 11 Swedish:names
26: ISO 15 Italian
27: ISO 17 Spanish
28: ISO 21 German
29: ISO 60 Norwegian v1
30: ISO 69 French
31: Windows 3.0 Latin 1
32: Windows Baltic
33: Symbol
34: Wingdings