Registering/Deleting/Renaming Stored Programs - Xerox ApeosPort-II 5010 User Manual

Registering/Deleting/Renaming Stored Programs

The [Stored Programming] screen allows you to register, delete, and rename stored
programs.
Important • When registering a stored program to select paper size or type loaded on Tray 5 (Bypass),
• If any of the following operations is performed while a stored program is being registered,
• If any of the following operations is performed after a stored program registration, the
Note • The following cannot be registered: System Settings, [Browse...] under Scan to PC, Job
• A stored program registration is cancelled when the <Interrupt> button is pressed, when the
1
Press the <All Services> button.
2
Select [Setup Menu].
3
Select [Stored Programming].
4
Select the feature.
Store
Register a stored program.
Refer to "Registering Stored Programs" (P.220).
Delete
Deletes a stored program.
Refer to "Deleting Stored Programs" (P.220).
Enter/Change Name
Enter or change a stored program name.
Refer to "Entering/Changing a Stored Program Name" (P.221).
register both the paper size and the paper type. If only one of them is registered, the stored
program may not be called properly.
the stored program may not be registered or may not work correctly.
- Removing or inserting a paper tray
- Loading or reloading paper into Tray 5 (Bypass)
registered stored program may not be called properly.
- If the stored program has the Watermark feature and a Watermark setting is changed.
- If any registered feature becomes disabled due to its value change under System Settings.
- If the stored program has an operation for a mailbox and the mailbox passcode is changed.
Flow Sheets, Address Book, and other stored programs.
Auto Clear feature causes a time-out, or when a popup window (such as a paper jam
window) appears.
Registering/Deleting/Renaming Stored Programs
7
219