Xerox ApeosPort-II 5010 User Manual page 463

Category
Error Code
C P F S M O
016-706
O
016-707
O
016-708 O
016-710
O
016-711
O
016-712
016-713
016-714
016-716
O
016-717
O
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
[Cause] The hard disk space is insufficient because Secure Print
users exceeded the allowed number.
[Remedy] Remove unnecessary documents from the machine, and
delete unnecessary Secure Print users.
For information about Secure Print, refer to "Secure Print" (P.356). For
information about mailboxes, refer to "Printing/Deleting Documents in the
Mailbox" (P.210).
[Cause] Unable to print with the Sample Print feature because a
HDD Extension Kit is unattached or defective.
[Remedy] A HDD Extension Kit is required for the Sample Print
feature. If the HDD Extension Kit is defective, contact our
Customer Support Center.
[Cause] Unable to annotate due to insufficient hard disk space.
[Remedy] Remove unnecessary data from the hard disk to increase
free disk space.
[Cause] Unable to register the Delayed Print document because
HDD Extension Kit is unattached.
[Remedy] HDD Extension Kit is required to use the Delayed Print
feature.
O Refer to 016-985.
O
Refer to 003-751.
O [Cause] The input passcode does not agree with the passcode set
to the mailbox.
[Remedy] Input the correct passcode.
O [Cause] The specified mailbox does not exist.
{Remedy] Create a new mailbox or specify an existing mailbox.
[Cause] Unable to spool TIFF file due to insufficient hard disk
space.
[Remedy] Remove unnecessary documents and users from the
machine, and then attach the hard disk. For information on
attaching the hard disk, contact our Customer Support
Center.
Refer to "Printing/Deleting Documents in the Mailbox" (P.210).
[Cause] Unable to create a "transmission report (undelivered)" or
"transmission report" because transmission result
information required for creating the report is not stored in
the machine's memory.
[Remedy] Take one of the following actions:
Execute the jobs for large size iFax documents (about
2GB) by splitting each document to minimize memory or
HDD usage.
If the large number of scan or iFax documents are being
processed, wait to execute a new job until the jobs are
completed.
After the job that you want to check in a report is
completed, do not execute 200 or more jobs to have the
job recorded on a report.
Cause and Remedy
Error Code
15
461