Layout Adjustment; Sided Originals (Transmitting 2-Sided Originals); Original Size (Specifying The Scan Size For The Original) - Xerox ApeosPort-II 5010 User Manual

Table of Contents

Advertisement

Layout Adjustment

On the [Layout Adjustment] screen, you can configure features for scanning
documents. The following shows the reference section for each feature.

2 Sided Originals (Transmitting 2-sided Originals)................................................................. 133

Original Size (Specifying the Scan Size for the Original) ....................................................... 133

Mixed Sized Originals (Scanning Different Size Documents Simultaneously) ...................... 134
Book Scanning (Scanning Facing Pages onto Separate Sheets) .............................................. 135
Reduce/Enlarge (Specifying a Scan Ratio) .............................................................................. 136
Stamp (Adding a Stamp when Scanning a Document) ............................................................ 136
1
Select [Fax/Internet Fax] on the [All
Services] screen.
2
Select the [Layout Adjustment] tab,
and then select a feature on the
[Layout Adjustment] screen.
2 Sided Originals (Transmitting 2-sided Originals)
This feature is the same as [2 Sided Originals] on the [General Settings] tab. For information on
[General Settings], refer to "2 Sided Originals (Transmitting 2-sided Originals)" (P.129).
Original Size (Specifying the Scan Size for the Original)
This feature allows you to set the scan size for fax transmission.
The machine scans the document at the size you specify, regardless of the original
size. You can add margins, or delete unwanted margins using this feature.
Note
• The default values for buttons other than the [Auto Size Detect] button can be changed in
• When a document size cannot be detected automatically, a message appears prompting
1
Select [Original Size] on the
[Layout Adjustment] screen.
2
Select the desired scan size.
Auto Size Detect
Detects the document size automatically.
Auto-detectable
Document size
Refer to the table in "Paper Size Settings" (P.280) for information on the document sizes that can be
automatically detected.
the System Administration mode. For information on how to change the default values, refer
to "Original Size Defaults" (P.304).
you to enter the document size.
Document Feeder
B5 , B4, A5 , A4, A4 ,
A3, 8.5 x 11 inches

Layout Adjustment

Document Glass
B6, B6 , B5, B5 , B4, A6,
A5, A5 , A4, A4 , A3, 8.5 x
11 inches , 8.5 x 13 inches,
8.5 x 14 inches
4
133

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apeosport-ii 4000Apeosport-ii 3000

Table of Contents