Output Format; Read Receipts - Xerox ApeosPort-II 5010 User Manual

5 Scan

Output Format

On the [Output Format] screen under [E-mail], [Scan to Mailbox], or [Scan to PC], you
can configure the output formats.
For more information, refer to below.

Read Receipts............................................................................................................................202

Split Send (Sending in Sections)...............................................................................................203
File Name (Specifying a Name for the File to be Sent)............................................................203
Reply To (Specifying a Reply Address) ...................................................................................203
File Name Conflict (Setting the Action to be Taken for File Name Conflict)..........................204
Document Name (Specifying a Name for the File to be Saved)...............................................204
1
On the [All Services] screen, select
[E-mail], [Scan to Mailbox], or [Scan
to PC].
2
Select the [Output Format] tab, and
then select a feature on the [Output
Format] screen.
Note
Read Receipts
This feature allows you to receive read receipts from e-mail recipients when using the
5
[E-mail] feature. This feature is not available unless recipients support the MDN
feature.
Note
1
Select [Read Receipts].
2
Select [On].
Off
Select this item when you do not
request read receipts.
On
Select this when you request read receipts.
202
• The buttons displayed on the screen depend on the scan feature selected on the [All
Services] screen. The screen shown above is for the E-mail feature.
• When multiple e-mails are sent using [Split Send], then a read receipt is requested for each
e-mail.
• Read receipts are returned to the address specified in [Reply To], or they are returned to the
address specified in [From] if [Reply To] is not set.
• This feature is only available when the recipient also sets to return read receipts.