Reports - Xerox ApeosPort-II 5010 User Manual

Background Suppression (B/W Copy)
Set how the machine suppresses background colors on colored paper documents. Based on
the option you select, the machine detects the background color density level of a document
and suppresses the background.
Select [High Speed] to sample a section of the original and detect the background color.
Select [High Quality] to conduct a pre-scan, and sample the whole document to detect the
background color.
Important • When you select [High Quality], and if [Corner Shift] is selected in [Image Shift] and a ratio
Image Enhancement
Select whether or not to carry out image enhancement. If you select [On], copy data is
smoothed, to give a smoother appearance.

Reports

These settings relate to printing reports.
Print Report Button
Select whether or not to permit printing reports only in [User Mode] of the System
Administration mode. Selecting [Disabled] displays the [Print Report/List] and [Error History
Report] buttons only in the System Administration mode, under [Machine Status] > [Billing
Meter/Print Report].
For information on [Print Report/List], refer to "Print Report/List" (P.374).
Job History Report
You can select whether or not to automatically print a [Job History Report] when a total of 50
jobs have been processed. All jobs are automatically listed on the printed report.
Activity Report
Select whether or not to automatically print an activity report when a total of 100
communication results have been obtained.
Transmission Report - Undelivered
Select whether or not to automatically print a transmission report (undelivered).
Transmission Report - Cancelled
Select whether or not to automatically print a transmission report (undelivered) for a
cancelled document.
Mailbox Report
Select whether or not to automatically print a [Mailbox Report].
Broadcast/Multi-Poll Report
Select whether or not to automatically print a [Broadcast/Multi-Poll Report].
Relay Broadcast Report
Select whether or not to automatically print a [Relay Broadcast Report], and a location where
the report is printed.
Off
Does not print a report automatically.
not greater than 60% in [Reduce/Enlarge] is set, a part of an image may not be printed or
blank paper may be output.
Common Settings
10
277