Table of Contents
Advertisement
5 Scan
Operations during Scanning
The following describes the operations available during scanning. The following shows
the reference for each operation.
Stopping the Scan Job ...............................................................................................................178
Changing Scan Settings ............................................................................................................179
Stopping the Scan Job
To cancel scanning a document, follow the procedure below.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
5
2
Select [Cancel].
Note
If the screen shown in step 2 does not appear even after you press the <Stop>
button on the control panel:
Depending on the jobs in progress, screens for canceling jobs may not appear. In that
case, use the following procedure to cancel a scan job on the [Current and Pending
Jobs] screen in Job Status.
1
Press the <Job Status> button.
178
• If two or more jobs are in
progress, a confirmation
screen appears for each job.
Select [Start] or [Cancel]
depending on whether you
want to start or cancel the job.
1
2
3
4
5
6
7
8
9
0
#
C
1
2
3
4
5
6
7
8
9
0
#
C
<Stop> button
<Job Status>
button
- Quick Links:
- Error Code
Hide quick links:
Advertisement
Table of Contents
