3 Copy
2
Select the job to cancel, and then
select [Stop].
Changing the Number of Copies
During scanning or copying the document, you can change the number of copy sets.
1
Press either [Stop] on the touch
screen or the <Stop> button on the
control panel.
3
2
Select [Change Quantity...].
3
Set the number of copy sets with the numeric keypad. The new quantity must include
the number of copies that have already been printed. You cannot enter a number less
than the number of copies that have already been printed.
4
Press the <Start> button.
Interrupting the Copy Job
You can temporarily stop the copy job to have the machine process another job.
1
Press the <Interrupt> button.
Note
2
Load a document and set features
if necessary.
60
• The interrupt indicator lights
up to indicate that the
machine is in the interrupt
mode.
1
2
3
4
5
6
7
8
9
0
#
C
1
2
3
4
5
6
7
8
9
0
#
C
<Stop> button
<Interrupt>
button