Xerox ApeosPort-II 5010 User Manual page 444

15 Problem Solving
The printing is not offset.
Printing is slow.
The print option settings
do not take effect.
Image edges are missing.
15
442
Cause The machine does not have the offset feature.
No Action For offset output, the Exit Kit (Exit2+OCT2) or the finisher must
be attached.
Cause [High Resolution] has been selected for [Print Mode].
No Action When image data, such as a photo, is printed with the high
image quality, the print speed becomes slow. Select [Normal]
for [Print Mode].
Cause The print driver used is for another model.
No Action Install the print driver for this model.
Cause The required optional kit is not attached on the machine.
Action Check the options attached on the machine, and set the
configuration again.
Cause The image is larger than the printable area.
Action Expand the printable area, or reduce the document print area.