Xerox ApeosPort-II 5010 User Manual page 336

10 System Settings
Last Name
Enter a recipient's last name (up to 32 characters).
For information about how to enter characters, refer to "Entering Text" (P.266).
First Name
Enter a recipient's first name (up to 32 characters).
For information about how to enter characters, refer to "Entering Text" (P.266).
Transfer Protocol
Set the forwarding destination protocol. You can select from [FTP] and [SMB].
Server Name/IP address
Enter a name or IP address of a forwarding destination server.
Shared Name (SMB Only)
Enter the shared name set for the SMB folder.
Important • If the "/" mark is used at the top of a shared name, a job flow cannot read the shared name
Save In
Enter the directory for storing documents. When SMB is selected, use the UNC format.
User Name
When a user name is required to be input by the forwarding destination server, set the user
name.
When [FTP] is selected under [Transfer Protocol], up to 32 characters are allowed.
When [SMB] is selected under [Transfer Protocol], use one of the following formats.
10
Password
When a password entry is prompted by the forwarding destination server, specify a
password. You can enter up to 32 characters for a password.
334
correctly. Do not use the "/" mark at the top of a shared name.
Forwarding via FTP
Example: To save in the bbb directory under the aaa directory in the root directory.
aaa/bbb
Forwarding via SMB
Example: To save in the bbb directory under the aaa directory in a specified volume.
aaa\bbb
For Active Directory:
User name@Domain name (User name: up to 32 characters / Domain name: up to 64
characters)
Example: fuji@example.com (fuji: user name / example.com: domain name)
For Windows NT domains:
Domain name\User name (Domain name: up to 64 characters / User name: up to 32
characters)
Example: example\fuji (example: domain name / fuji: user name)
For workgroups:
Local user (up to 32 characters)
Example: Fuji-Taro