Mac Notification Commands - D-Link DES-1228/ME Reference Manual

The MAC Notification commands in the Command Line Interface (CLI) are listed, in the following table, along with their
appropriate parameters.
Command
enable mac_notification
disable mac_notification
config mac_notification
config mac_notification ports
show mac_notification
show mac_notification ports
Each command is listed, in detail, in the following sections.
enable mac_notification
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To enable MAC notification without changing basic configuration:
DES-1228/ME:5#enable mac_notification
Command: enable mac_notification
Success.
DES-1228/ME:5#
disable mac_notification
Purpose
Syntax
Description
Parameters
Restrictions
DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
{interval <int 1-2147483647> | historysize <int 1-500>} (1)
[<portlist> | all] [enable | disable]
{<portlist>}
Used to enable global MAC address table notification on the Switch.
enable mac_notification
This command is used to enable MAC address notification without
changing configuration.
None.
Only Administrator level, Operator level or Power User level users
can issue this command.
Used to disable global MAC address table notification on the Switch.
disable mac_notification
This command is used to disable MAC address notification without
changing configuration.
None.
Only Administrator level, Operator level or Power User level users
can issue this command.
MAC N
OTIFICATION
249
29
C
OMMANDS