D-Link DES-1228/ME Reference Manual page 103

DES-1228/ME Metro Ethernet Managed Switch CLI Reference Guide
Parameters
Numerical
Code
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
local0 − Specifies that local use 0 messages will be sent to the remote host.
This corresponds to number 16 from the list above.
local1 − Specifies that local use 1 messages will be sent to the remote host.
This corresponds to number 17 from the list above.
local2 − Specifies that local use 2 messages will be sent to the remote host.
This corresponds to number 18 from the list above.
local3 − Specifies that local use 3 messages will be sent to the remote host.
This corresponds to number 19 from the list above.
local4 − Specifies that local use 4 messages will be sent to the remote host.
This corresponds to number 20 from the list above.
local5 − Specifies that local use 5 messages will be sent to the remote host.
This corresponds to number 21 from the list above.
local6 − Specifies that local use 6 messages will be sent to the remote host.
This corresponds to number 22 from the list above.
local7 − Specifies that local use 7 messages will be sent to the remote host.
This corresponds to number 23 from the list above.
udp_port <udp_port_number> − Specifies the UDP port number that the
syslog protocol will use to send messages to the remote host.
ipaddress <ipaddr> − Specifies the IP address of the remote host where
syslog messages will be sent.
state [enable | disable] − Allows the sending of syslog messages to the
remote host, specified above, to be enabled and disabled.
Restrictions Only Administrator level, Operator level or Power User level users can issue
this command.
Facility
kernel messages
user-level messages
mail system
system daemons
security/authorization messages
messages generated internally by syslog
line printer subsystem
network news subsystem
UUCP subsystem
clock daemon
security/authorization messages
FTP daemon
NTP subsystem
log audit
log alert
clock daemon
local use 0 (local0)
local use 1 (local1)
local use 2 (local2)
local use 3 (local3)
local use 4 (local4)
local use 5 (local5)
local use 6 (local6)
local use 7 (local7)
99